Dudheshwar, Ahmedabad, Gujarat
GST No. 24AANFS2756E1Z4
Approx. Rs 100 / PieceGet Latest Price
Product Details:Material Type | Copper and Carbon |
Packaging Type | Box |
Shore Hardness | 11-25 HS |
Flexural Strength | 12-24 Greater than or equal to MPA |
Linear Velocity | 25-40m/s |
Density | 1.72-2.9 g/cm3 |
We feel proud to introduce ourselves as the leading manufacturer, exporter and supplier of supreme grade Carbon Brushes. Provided brushes find their applications in electric motors, alternators and electric generators to conduct current between stationary wires and moving parts. Designed and manufactured in adherence with international quality standards, provided brushes are widely demanded in industries. To meet the varied demands of clients, we offer these Carbon Brushes in several technical specifications at cost effective prices.
Approx. Rs 100 / Piece(s)Get Latest Price
Product Details:Minimum Order Quantity | 25 Piece(s) |
Phase | Three Phase |
Material Type | Copper |
Current | 50A |
Number Of Rings | 3 |
Inner Diameter | Approx 46mm |
Brush Holder | Aluminum brush holder |
Additional Information:
Approx. Rs 120 / Piece(s)Get Latest Price
Product Details:Minimum Order Quantity | 25 Piece(s) |
Material | Carbon |
Usage/Application | Industrial |
Packaging Type | Box |
Bending Strength | 24-36 Mpa |
Ash Content | 0.3% Max |
Density | 1.58-1.85 g/cm3 |
Additional Information:
Approx. Rs 100 / Piece(s)Get Latest Price
Product Details:Phase | Three Phase |
Brand | Makseals |
Material | Copper |
Features | Abrasion resistance, accurate dimensions,Easy installation, high conductivity |
Current Ratings | High conductivity |
Number Of Rings | 3 |
Approx. Rs 60 / pairGet Latest Price
Product BrochureProduct Details:Material | Carbon |
Country of Origin | Made in India |
Density | 1.82-2.25 g/cm3 |
Compressive Strength | 100-260 MPa |
Porosity | 1-1.5% |
Temperature Range | 250-400 Degree C |
Carbon/graphite bushes & bearings are made in special grades beyond the limits of other materials. These are self lubricants and has a polishing effect upon the shaft against which it rubs, as such the wear rate is low. Also these can run dry and suitable for condition where oil contamination is avoided. These are also unaffected by acids & alkalies and suitable for use up to high temperatures. Carbon impregnated bush bearings in two halves especially developed for stokers of boiler, replaced the cast iron bushes gives most satisfactory result, Because of dry running & high lubricant properties.
Features:Approx. Rs 1,500 / PieceGet Latest Price
Product Details:Material | Carbon Steel |
Brush Top | Pad, Clip |
Packaging Type | Box |
Plating | Brass Plating |
Usage | Industrial |
As one of the distinguished manufacturers, exporters and suppliers, we are involved in offering a qualitative array of Carbon Brush Holders to our clients. Designed to use in generators and motors for securing carbon brush, these brush holders are widely known for their application specific designs. Proposed brush holders are precisely manufactured using optimal grade basic materials and innovative techniques in compliance with international standards. Available in various designs and other specifications, offered Carbon Brush Holders can be availed from us at most competitive prices.
Approx. Rs 120 / pairGet Latest Price
Product Details:Material | Carbon |
Usage/Application | Motor |
Density | 1.82-2.25 g/cm3 |
Fractural Strength | 75-95 MPa |
Compressive Strength | 100-260 MPa |
Shaw Hardness | 85-90 HS |
Porosity | 1-1.5% |
Temperature Range | 250-450 Degree C |
Approx. Rs 150 / PieceGet Latest Price
Product BrochureProduct Details:Material | Carbon |
Usage/Application | Motor |
Brand | SD |
Country of Origin | Made in India |
Density | 1.82-2.25 g/cm3 |
Fractural Strength | 75-95 MPa |
Compressive Strength | 100-240 MPa |
Shaw Hardness | 85-90 HS |
Porosity | 1-1.5% |
Temperature Range | 250-450 Degree C |
Carbon/graphite bushes & bearings are made in special grades beyond the limits of other materials. These are self lubricants and has a polishing effect upon the shaft against which it rubs, as such the wear rate is low. Also these can run dry and suitable for condition where oil contamination is avoided. These are also unaffected by acids & alkalies and suitable for use up to high temperatures. Carbon impregnated bush bearings in two halves especially developed for stokers of boiler, replaced the cast iron bushes gives most satisfactory result, Because of dry running & high lubricant properties.
Features:Approx. Rs 80 / pairGet Latest Price
Product Details:Material | Carbon Graphite |
Usage/Application | Generator Motor |
Packaging Type | Box |
Country of Origin | Made in India |
Rated Power | 100MW-1000MW |
Wire Material | Copper |
We feel proud to introduce ourselves as the leading manufacturer, exporter and supplier of supreme grade Carbon Brushes. Provided brushes find their applications in electric motors, alternators and electric generators to conduct current between stationary wires and moving parts. Designed and manufactured in adherence with international quality standards, provided brushes are widely demanded in industries. To meet the varied demands of clients, we offer these Carbon Brushes in several technical specifications at cost effective prices.
Features:Optimum performance
Maintenance free
High conductivity
Enhanced service life
Rugged construction
Precise dimensions
Anti corrosive
Approx. Rs 250 / Piece(s)Get Latest Price
Product Details:Usage/Application | Cranes, Monorails, Electric Hoists, Mobile Automation Equipment |
Rated Voltage | 380/660V |
Rated Current | 30A-150A |
Packaging Type | Box |
Cover Material | Carbon |
Wire Material | Copper |
Approx. Rs 80 / PieceGet Latest Price
Product Details:Minimum Order Quantity | 20 Piece |
Material | Brass |
Usage/Application | NGEF AC Motor Pocket |
Mounted Type | Stud Mounted |
Packaging Type | Box |
Corrosion Resistance | 100% |
Weight | 1 to 5 kg |
Size | 40 x 20 mm |
Additional Information:
Approx. Rs 10 / Piece(s)Get Latest Price
Product Details:Usage/Application | Industrial |
Packaging Type | Roll |
Thickness | 1-2 mm |
Width | 30-50 mm |
Length | 10-20 m |
Leveraging on our vast industry experience, we are offering our clients a quality range of Constant Force Springs that offers constant force over their range of motion. Designed and manufactured under the stern guidance of our adroit professionals in accordance with international standards, these springs are widely used for installation in bush holders. We are offering these Constant Force Springs in several specifications at the most affordable prices to the clients.
Explore More Products
© S. D. Industries. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited